 |
Intermec CK71G w/o Wireless and Bluetooth®
|
Featuring Microsoft Windows Mobile 6.5 Operating System *Standard Range Imaging Scanner*
|
Click here to view vendor's web site
All CK71G models are TAA compliant.
You may use the AIT-V contract or GSA Advantage to order.
For product assistance, contact: Dave Jones Federal Account Executive Honeywell Technology (Intermec) This email address is being protected from spambots. You need JavaScript enabled to view it. Office: 757-234-6588 Mobile: 757-849-3942
|
You may view the AIT-V contract to obtain contract information
Attention: CLIN 001CN or 001DN must be ordered with these units to disable all wireless communication. |
|
|
Qty.
|
CLIN#
|
Description
|
1
|
0001CA
|
CK71G without Wireless and Bluetooth (Batch)
Hand Held Barcode Terminal with Full Alpha-numeric Keypad.
CK71GA6MN00G1A10 is the default configuration.
Batch configurations have no wireless capability. All radios are factory disabled. (CLIN 001CN applied)
All configurations are 0” SSD.
|
|
|
HHTs include these standard features:
- WinMobile 6.5
- Windows Embedded Handheld Premium
- World-Wide English
- Non-Incendive certification (HHT only)
- FIPS certification
A6 Alpha-numeric Keypad M Near/Far imager N No Camera G1A10 0” SSD Batch + VGA display
CLIN includes:
- DX1G52B20 -Desktop,USB,Batt,CK70/71,NoPwrCd, EU
- 851-095-131 Univ Supply, 12V 48W, RA 2.5x5.5 Level V
- 871-238-xxx Ether Module, Flex Dock (included only upon request)
- 321-576-004 Cable, USB-A to USB-B, 2meter RoHS
- 318-046-111 Operational and Spare Battery Pack, CK70/71
- 203-928-001 Kit, Tethered Stylus, CK70/71 (5/pk)
- MICRO-SD CARD, 2GB
- 946-002-xxx CD Documentation
- Country Specified Power Cord - variable P/N
Intermec Snap-on Common Access Card (CAC) Reader with CAC-enablement software. This option includes a Flex Dock cup.
|
|
|
Accessories available:
- Holster and Shoulder Strap | 815-075-101 Holster, CK71 w/ Scan Handle (TAA)
- Detachable Handle and Trigger (if available and not inherent to the HHT) | 805-836-101 Scan Handle, CK71 (TAA)
- Rechargeable Battery | 318-046-111 Battery Pack, CK70/71 (TAA)
- Multiple (4) Battery Charger | DX2G4BB20 4-pos Battery Chgr CK3/CK7x No Pwr Cord(TAA)
851-095-121 Univ Supply, 12V 48W, RA 2.5x5.5 Level V Country Specific Power Cord - variable P/N
- Semi-transparent, Flexible Dust Cover | N/A – HHT is IP67 – sealed to dust and rain
- One pack of 12 tethered replacement styli | 203-928-001 Kit, Tethered Stylus, CK70/71 (5/pk) x 3
|
|
|
***** Warranty ***** Standard AIT V Contract Warranty Applies
|
Please note that all orders must follow the Fair Opportunity requirements.
Qty.
|
CLIN#
|
Description
|
1
|
0001DA
|
CK71G without Wireless and Bluetooth (Batch)
Hand Held Barcode Terminal with Direct Part Mark Reading Capability and Full Alpha-numeric Keypad.
CK71GA6KN00G1A10 is the default configuration.
Batch configurations have no wireless capability. All radios are factory disabled. (CLIN 001DN applied)
All configurations are 0” SSD.
|
|
|
HHTs include these standard features:
- WinMobile 6.5
- Windows Embedded Handheld Premium
- World-Wide English
- Non-Incendive certification (HHT only)
- FIPS certification
A4 Alpha-numeric Keypad K EA30 High Performance imager N No Camera G1A10 0” SSD Batch + VGA display
CLIN includes:
- DX1A02B20 -Desktop,USB,Batt,CK70/71,NoPwrCd, EU
- 851-095-1xx Univ Supply, 12V 48W, RA 2.5x5.5 Level V
- 871-238-xxx Ether Module, Flex Dock (included only upon request)
- 321-576-004 Cable, USB-A to USB-B, 2meter RoHS
- 318-046-111 Operational and Spare Battery Pack, CK70/71
- 203-928-001 Kit, Tethered Stylus, CK70/71 (5/pk)
- MICRO-SD CARD, 2GB
- 946-002-xxx CD Documentation
- Country Specified Power Cord - variable P/N
Intermec Snap-on Common Access Card (CAC) Reader with CAC-enablement software. This option includes a Flex Dock cup.
|
|
|
Accessories available:
- Holster and Shoulder Strap | 815-075-101 Holster, CK71 w/ Scan Handle (TAA)
- Detachable Handle and Trigger (if available and not inherent to the HHT) | 805-836-101 Scan Handle, CK71 (TAA)
- Rechargeable Battery | 318-046-111 Battery Pack, CK70/71 (TAA)
- Multiple (4) Battery Charger | DX2G4BB20 4-pos Battery Chgr CK3/CK7x No Pwr Cord(TAA)
851-095-121 Univ Supply, 12V 48W, RA 2.5x5.5 Level V Country Specific Power Cord - variable P/N
- Semi-transparent, Flexible Dust Cover | N/A – HHT is IP67 – sealed to dust and rain
- One pack of 12 tethered replacement styli | 203-928-001 Kit, Tethered Stylus, CK70/71 (5/pk) x 3
|
|
|
***** Warranty ***** Standard AIT V Contract Warranty Applies
|
Please note that all orders must follow the Fair Opportunity requirements.