DPAS Supported Label Printers  


Printer Settings in Chrome: For detailed instruction on printing labels with Chrome web browser, please view this RefDoc.

COMPATIBILITY: Any 203dpi printer manufactured by Zebra, Honeywell, or Intermec (and uses the standard ZPL/IPL interpreter language) should work with DPAS. Some of these printers have optional 300 and 600 DPI versions that will not work with DPAS.  Please contact our Helpdesk if you are questioning the compatibility of a printer not listed below.
RFID NOTE: The Zebra ZT610 and the R110Xi4 are the ONLY RFID printers tested and confirmed to work with DPAS.
NOTE: Items identified with an asterisk (*) are available for purchase from an Army IDIQ contract. Click HERE for a link to the contract.
Printer Model Features


Zebra ZT610

Print Resolution(dpi): 203

RFID Capable

Communications: USB 2.0, high-speed, RS-232 Serial, Gigabit Ethernet, Bluetooth 4.0


Zebra ZT510*

Print Resolution(dpi): 203

Communications: USB, Serial, Gigabit Ethernet, Bluetooth LE


Zebra GK420

Print Resolution(dpi): 203

Thermal Transfer: GK420t  |  Direct Thermal: GK420d

Communications: USB, Serial, Parallel, or Ethernet

*Recall: Power Supply (GK420)

Zebra ZT230 Printer  

Zebra ZT230

Print Resolution(dpi): 203

Perfect replacement for S4M

Communications: USB 2.0, RS-232 Serial

Intermec PM43G Printer  

Intermec PM43G*

Print Resolution(dpi): 203

Communications: USB 2.0, RS-232 Serial, 10/100 Ethernet, Bluetooth, WiFi

Intermec PD43G

Intermec PD43G

Print Resolution(dpi): 203

Communications standard: USB, USB Host  |  Optional: Ethernet (NIC), Parallel Port, Serial Port, Bluetooth, Wifi


Printer Issues: Since the deployment of Release 2.6.0, label printers attached to Internet Explorer 8 machines have been affected. This is due to the release of new code which supports Internet Explorer 10 and 11. The fix is to change the beginning and ending sequence defined in the print driver. This can be accomplished by performing the following steps:

Start menu > Devices and Printers > Right Click on the correct Print Driver > Left Click on Print Preferences > Select the Advanced tab > Select the Other button towards the bottom of the page > Under the Commands section, Change the Start sequence to $% > Under the Commands section, Change the End sequence to %$ > Select the Close button > Apply and OK.

For detailed instruction, please view this RefDoc.





Discontinued - DPAS Supported Label Printers  


DISCONTINUED: These printers are no longer available for purchase but continue to work and be supported by DPAS.
Printer Model Features


Zebra TLP 2844-Z


Discontinued for purchase  |  Supported for use by DPAS

*Recall: Power Supply


Zebra R110Xi4


Discontinued for purchase  |  Supported for use by DPAS

*Recall: Power Supply

Setup Videos

Zebra RZ400

Discontinued for purchase  |  Supported for use by DPAS 

Zebra S4M

 Discontinued for purchase  |  Supported for use by DPAS

Intermec Easycoder PM4i

Discontinued for purchase  |  Supported for use by DPAS 

Intermec PD42G

Discontinued for purchase  |  Supported for use by DPAS 



Printer Ribbons/Labels  


Property Accountability Module Label Types and Sizes
Label Size
UII Capable Label
Location Label 
1" x 2"
2" x 1.25"
3" x 1"
4" x 1"
4" x 1" RFID
4" x 1" RFID 1/8" Gap

Warehouse Management Label Types and Sizes
Label Type
Size: 1.50" x .50"
Size: 3.00" x 2.00" 
Size: 6.00" x 4.00"
Shelf Life Extension
Stock Nbr
Expiring Items
Inspection Due


RECOMMENDATION: DPAS suggests using full polyester high tack labels with full resin ribbons. This produces the most durable labels to use on equipment.

RFID Label Information:

Offsets, Hanging tags, Ties & Mounts


RFID Accessories (.pdf 26 KB)

For immediate assistance with Printers and Labels, please contact the DPAS Helpdesk.