The field "Receive Dt" is required on the Materiel Mgmt-->Receiving but we cannot view this field on  asset inquiry. Received date is an audit requirement for General Equipment Assets.

 

Add a "Receive Dt"  column in the Inventory Update Manager, ICN Inventory, and Inventory Activity.  Add the ability to edit the "Receive Dt" field in the Inventory Update Manager.

 

 

 

DOD requirement.

 

Frequency: Hourly

 

DoD Components are required to record and maintain data element "Date Placed in Service"  in their respective APSRs as stated in DoDI 5000.64 and the USSOCOM Directive 700-2.

 

Add a "Date Placed in Service" required field during the receiving process.  Add a "Date Placed in Service"  column in the Inventory Update Manager, ICN Inventory, and Inventory Activity.  Add the ability to edit the "Date Placed in Service" field in the Inventory Update Manager.

 

 

DOD requirement.

 

Frequency: Hourly

 

Currently the Force System Management Module only interfaces with the Property accountability module which is used to determine the DAF authorizations to build requirements. However, we require the capability to establish requirements for items that do not fall into the Class VII category and in some cases consumable materiel.

 

Establish the capability to create FSM authorizations for assets managed in the Warehouse module.

 

IAW AFI 23-101 The DAF is required to maintain Class II and Class IX materiel to support the wing's deployment requirements and report readiness capabilities. Establishing authorizations for materiel provides the DAF the capability to ensure the posture of materiel is appropriately aligned to and determine overages and shortfalls for future procurements or reposturing.  

 

This would provide Senior leadership visibility of all DAF stockage/storage requirements and current posture to make strategic level decision.

 

Frequency: Daily

 

According to SOCOM Directive 700-2 we are to conduct monthly inventory of All controlled, classified or sensitive Controlled Inventory Item Code (CIIC) items with codes 1-6, 8-9, P, Q, R, S, Y (including all Night Vision Devices and Navigational Devices) regardless of cost will be inventoried on a monthly basis.

 

Add additional selection parameters to the Issued Inventory under the Details section with the ability to select multiple Stock Numbers, CIIC codes, and Commodity types.  Enable the user to save selected stock numbers, CIIC codes, and commodity types with the ability to name the saved selection.  Enable the user to edit and delete saved selections.  Enable the user to select a previously saved selection which will auto-populate Stock Number, CIIC , and Commodity Types.  Add a Select All UIC's under Select UIC to print all (multiple) issued inventory.  The Stock Number, CIIC , and Commodity Type selection is default to all.

 

 

 

SOCOM requirement.

 

Frequency: Hourly

 

The current problem is we have some members in DPAS that have multiple issues from different warehouses/locations.  We need to be able to differential between the issues so we are able to return equipment to the proper warehouse/location,  Proposed solution would be to have a way to designate the exact items from a particular warehouse/location. Possible Fix would be to add the Master Issue List(MIL) option on the individual return so you are able to pull the exact items the individual was issued from a particular warehouse/location.

 

Recommendation is to add a MIL option on the individual return so you are able to pull the exact items the individual was issued from a particular warehouse/location.  Inserting the MIL, would allow the CSR to pull up the desired gear list to return.

 

Yes, because the Consolidated Storage Program (CSP) goal is to have an accurate inventory and with this functionality the customer service representatives (CSRs) will be able to conduct returns into the system with more truthful data.  

 

Having this capability will help all warehouses improve on inventory accuracy across the enterprise.  

 

Frequency: Daily

 

DPAS continues to expand its customer base.  As part of this expansion, there is a requirement to support shipments to foreign governments.  These shipments are assigned a MAPAC (Military Assistance Program Address Code) which is equivalent to a DoDAAC.  Today, DPAS permits the manual entry of a MAPAC, but there is no validation that what was entered is a valid MAPAC.  DPAS provides a data feed of MAPACs similar to the DoDAAC data feed.  This SCR is requesting DPAS add the MAPAC to its DLA DAAS agreement and provide for import / selection / validation of MAPACS from the master list of MAPACs.

 

Import MAPACs, provide the capability to select / validate a MAPAC that is entered to the master list of MAPACs. This change would apply to Materiel Mgmt, (Customer Requisition), Warehouse (Materiel Release Order).  The requisition service would need a change to support MAPAC validate if it supports Military Assistance Program ordering. Asset Disposition in PA  that utilizes the Address Directory will likely need to support Military Assistance issues.

 

This change improves / reduces the opportunity of error in the entry of a Military Assistance Program Address Code.  

 

Improves the overall entry and validation of a Military Assistance Program Address Code.  

 

Frequency: Weekly

 

DPAS designed the Contractor / Contract processes for use with the Materiel Mgmt. and Warehouse Mgmt. applications to be enterprise.  Once it is created, it is available for all to use. While this may be good (enter once / use by all), a user can also change the entries making them anything they want it to be not knowing the impact to other DPAS users.  Providing an automated process that does not require Help desk support to correct incorrect data is good, but there can be negative consequences if not properly managed. The impact could result in be materiel on loan to a contractor be re-assigned to a different contract / contractor without the user knowing their data was changed.  

 

It is recommended that DPAS review these processes for: 1) Restricting changes to those organizations that created them, 2) Notify the user who is making the update that the record they are updating is currently in use by other organizations, thus their change could impact the other organization's data and 3)  notify all organizations that are using the record that was changed of the change. It is also recommended that there be consideration given to enabling an organization to identify contractor / contracts that they are using rather than having to see all contractors / contractors that have been entered.  For example:  A west coast organization that purchases materiel from LOWES has no need to see LOWES (CAGEs) that do not reside within their proximity. Having the ability to restrict the list to those an organization users will reduce the time required to enter a record (less data to review / select) and reduce the chance of selecting an incorrect value.

 

This SCR results from a change that occurred within DPAS production by one organization that was not aware that contractor / contract data was enterprise.  They needed a new contractor and contract.  Seeing ones they were not using, they modified them to be something completely different which impacted another organization's data that established the records and were in use.  They didn't know their data was realigned to a different contractor / contract when the other organization hijacked their records. A change like this also impacts PIEE GFP reporting as the materiel is now assigned to an incorrect contract / contractor.

 

This solution enhances accuracy and may prevent an unwanted change that could take a significant amount of time to unravel and return the data to its correct state.  The impact of an enterprise change by an unknowing user the size of DPAS with a diverse user base could have a catastrophic impact to another organization's data that could take a significant effort to undo.

 

Frequency: Daily

 

According to SOCOM Directive 700-2 we are to conduct monthly inventory of All controlled, classified or sensitive Controlled Inventory Item Code (CIIC) items with codes 1-6, 8-9, P, Q, R, S, Y (including all Night Vision Devices and Navigational Devices) regardless of cost will be inventoried on a monthly basis.

 

During the creation of physical inventory add an Inv Mode to create a custom inventory selection of multiple Stock Numbers, CIIC codes, and a Type Asset Codes.  Enable the user to save selected stock numbers and CIIC codes with the ability to name the saved selection.  Enable the user to edit and delete saved selections.  Enable the user to select a previously saved selection which will auto-populate Stock Number, CIIC , and TAC.

 

 

 

SOCOM requirement.

 

Frequency: Hourly

 

The Application Administrator role/user tier is a bit of a misnomer. Additionally, in DLA J64 they refer to our privileged users (Jonathan Gillette, John O'Connor, Dave Czar, etc.) as App Admin but they have no relation to the Application Admin as it is defined in DPAS. For the sake of clarity internally and during audit it would be helpful to change the name of this role. With this change, updating the support url (https://dpas.dape.dla.mil/admin/ ) would be a good idea as since  "admin" implies privileged access to the system.

 

"Application Administrator" role/user tier could be renamed to "Application Support" and the url for the support site could be changed from "https://dpas.dape.dla.mil/admin/" to "https://dpas.dape.dla.mil/support/".

 

The change will assist with the audit support team's goal of clarifying DPAS processes and it will alleviate questions and confusion from the auditors each year.

 

Less questions/confusion during audit and internally when discussing this role.

 

Frequency: Hourly

 

Inventory Activity only shows activity of an asset during the time frame that the asset was attached to the respective warehouse.

 

Open up view capability to show entire asset inventory activity within the LP regardless of where the asset resides for all users.

 

 

 

Allows users to view the full cradle to grave history of an asset to conduct research and documentation for record keeping.

 

 

The current branding of the Defense Property Accountability System (DPAS) primarily associates the application with Property Accountability whereas DPAS has expanded its capabilities to include a full spectrum of logistics functions.  It is recommended that DPAS be re-branded to better reflect it functions.

Re-brand the DPAS as the Enterprise Logistics Management System (ELMS). This new branding will reflect a more inclusive representation of DPAS core functions, and provide applicability beyond the Department of Defense. The re-branding will involve updating the system as well as the systems documentation (design documents, training materials, training videos, desk guides, interface agreements, etc  so that everything align with the ELMS brand.

 

 

 

Re-branding DPAS to the Enterprise Logistics Management System (ELMS) will better portray the increased system's functionality since its inception as a Property Accountability system, and provide Non-DoD users with a system that does not contain "Defense" in its name.

 

Frequency: Hourly

The unit of issue for the stock number is FV that maps to X12-equivalent “Unit of Measure” as Q9 according to the master list conversion file from the DLA site, located at https://www.dla.mil/Defense-Data-Standards/Resources/LOGDRMS-Resources/. The schema currently loaded on the DEDSO website for 846R (004010F846R4RA28_Aug2123_ADC_1454.xsd) and a previous schema being used by DPAS contain a list of allowable “Unit of Measure” values in data element E_355. That list does not contain all of the X12 values listed in the current Conversion Table. DPAS is unable to process any XML:846R transactions containing a value not listed in the incomplete list. This is incorrect and addressed by the DEDSO Team by updating the 846R Schema.

 

The new and latest schema (004010F846R4RA28_Sept0324_DE355_TurnedOff.xsd) for 846R Transaction updated by DEDSO Team updated in DPAS and DAAS systems to allow processing of 846R transactions with “Unit of Measure” as Q9 code value successfully.

 

The 846R Transaction schema (004010F846R4RA28_Sept0324_DE355_TurnedOff.xsd) updated by DEDSO.
https://www.dla.mil/Portals/104/Documents/DLMS/TransFormats/Supplements/4010/004010F846R4RA28_Sept0324_DE355_Turned%20off.pdf

 

Required for the submission of 846R transactions with “Unit of Measure” as Q9 code value.

 

Frequency: Daily

 

An analysis conducted of DPAS TPF transactions for unsuccessful transaction errors and help desk tickets associated - determined the reason that the TPF was not successful is due to the user not establishing the profile correctly. The DPAS Customer Profile process within Materiel Mgmt. provides a repeatable setup process to support the Army's Total Package Fielding (TPF) if the DPAS users creates the correct profile.  The PA modules using the Address Directory process which would also benefit from the recommended changes.  The Customer Profile needs to be configured for the system the Unit is using for Property Accountability.  While most fielding’s are to Units using GCSS-Army, it could be Units using DPAS and in some situations a fielding could be another DoD property accountability system. By having the Customer Profile established correctly, it is estimated that TPF failures could be reduced by 35%-60%.     The problem is applicable to Materiel Mgmt. and Property Accountability modules.

 

ASA ALT is recommending several improvements to DPAS.  These enhancements will enable the DPAS customer to save time (protecting limited resources) with additional input, while reducing common error shortfalls and reduction in the DPAS HDT support.
        b. When a PMR NCK is received, DPAS should provide a method for the user to correct the error and resubmit the PMR and likewise when a Shipment Status NCK is received.  Allow for correction of the error or provide the user with the capability to cancel the fielding returning the inventory.

 

These proposed modifications aim to significantly reduce the man-hours required for searching, reprocessing unsuccessful transactions and HDT support to the user.  These improvements will lead to overall cost savings for the U.S. government and streamline warehouse movements with greater control and accuracy.

 

This solution enhances accuracy for large scale transactions  across the force and provides a total cost savings by reducing man hours and time-to-task required to accurately issue large scale amounts of inventory, while reducing  the DPAS HDT support.

 

Frequency: Daily

 

The Department of the Air Force needs API link from MyGeotab to DPAS for near real-time utilization capturing asset’s OBD.
Current telematics file upload process captures distance reported from a select period and adds the value to the previous meter reading to capture the current meter reading.  Using this process methodology fails to validate the accuracy of the previous meter reading and can lead to compounded errors if file upload continues. Telematics data feed from MyGeotab provides real-time meter reading directly from the asset’s computer. Using this value ensures data integrity by eliminating human data entry and potential flaws.  

Establish daily API feed from MyGeotab to DPAS.  Specific landing points: Mass utilization update. There is no need to build anything for this to happen (utilization should auto populate when opening work orders).
Update the telematics data transfer process to accept Current Meter Reading and not the current Distance value option.  This process will log an Asset Utilization Transaction with an updated Current Meter Reading based on the value directly from the telematics data source in MyGeotab database server via Advanced Programming Interface (API) feed. This feed would transfer one time per day at end of day. Additionally, build a validation check/error report into the process to prevent the assets’ Current Meter Reading record to update if the Current Meter Reading is negative in value compared to the previous meter reading within DPAS. With the validation check, we would require a report or inquiry to show what didn’t update so users can validate bad data and correct discrepancies.

Mandated and critical. Having this capability prevents erroneous data reporting into mandated sources (i.e., FAST).  FAST reports included over 15,000 flags tied to utilization and mileage errors within DPAS.  Using automated telematics is the way forward eliminating errors and adjusting entry format streamlines multiple interface requirements for end-users, ensuring accurate data entry and data integrity.  

Implementing this system change greatly improves DPAS data accuracy for FAST, sustainment budgeting and financial reporting. Combining the data feed into this platform will eliminate redundant data aggregation via multiple website operations that attribute to bad utilization data due to human error. This critical capability prepares the platform for electrification of assets (Future Fleet) by comparing electric vehicle utilization to fuel and mileage/hours. This automation will also improve overall cost savings in manpower and fleet health. Limited change to the system architecture is required due to the preexisting capability of data capture being available. This will simply automate the current process with a direct feed to the platform (preexisting authorization of MyGeotab commercial system communications exists).

 

Frequency: Daily

 

The review/revalidation of Information Owners and alternates (IOs/AIOs) is a topic that is broached each year during our annual SOC1 audit. I propose we provide real-time visibility to Organization IOs so that they can see their existing IO/AIO appointees in DPAS and can effectively review their appointees on a regular basis to make sure they are still appropriate.

Provide functionality that is part of the IO role where a new tab can list existing IO and AIO appointees by the Org's module and Tier. Allow for a print option.

 

Could replace 'IOs by group' request previously logged 2/13/2023 as SCR# 01886.

Support audit compliance by providing Organizations real-time visibility of their appointed IOs/AIOs.

Frequency: Hourly

 

Problem:   AF GFM-A CICPs operate on their contracts for about 5 years, then new contracts may be awarded to the existing contractor or to a new company.  For those AF GFM-A CICPs already transacting in DPAS, this translates to starting over with new conversion spreadsheets and passing data validation and data load performed by the DPAS Implementation Team.  DPAS does not have process(es) needed to copy existing production data to create new CICP entries for the new contracts.  AF GFM-A team proposed an 'easy button' process to copy and paste existing data to create new CICP entries.  The 'easy button' process is not a replacement for the current AF GFM-A DPAS Implementation process; its' an alternative to starting over with conversion spreadsheets.  The new capability would leverage/reuse the existing catalog data in DPAS to reduce implementation time.

 

DPAS will provide a CICP copy capability to copy existing production data from the expiring contract to the new contract.  The copy capability will provide the authorized user a data entry screen for the new contract number, DoDAACs, RIC, etc.  The data entry screen would replace the existing data within the copy function.

 

 

 

New CICP copy capability would reduce AF implementation time, re-use data already in DPAS and reduce DPAS Implementation team time need to validate and reload data.

 

Frequency: Yearly

Problem: Users currently have the ability to receive a part ordered against an asset once it's delivered from LRS. The issue is, when a customer gets the part and doesn't utilize the receive option within DPAS, it causes the ILS-S 1SH transaction to linger in the background in ILS-S creating a mismatch of data between the two systems.

 

Add the capability in DPAS to receive the ILS-S 1SI transaction (represents the customer signing for the part) to close the loop for M&U requisitions.

 

AFI 23-101 Para 5.4.11.5.4.
custodian and clear the DPAS document control record accordingly. (T-1).

 

Maintenance personnel can close a work order without signing for the part. This new feature for DPAS/M&U requisitioning will put the onus on the Logistics community to close the loop for M&U requisitions.

 

Frequency: Daily

Our current messaging architecture requires RabbitMQ as a message bus for communications across DPAS.  RabbitMQ being a Free and Open Source Software (FOSS) requires additional measures to be approved or configured in some environments including on-site installations.  This presents challenges to implementing DPAS in those locations.

 

Implement the SQL Server message bus transport and add configurations to allow SQL Server to be used as the message bus over RabbitMQ.  Though, RabbitMQ is the superior option, some locations don't require the throughput to justify the implementation costs.  The SQL Server implementation is sufficient for these smaller locations and is already an approved portion of DPAS.

 

 

This will reduce the regulatory requirements and overall time spent in implementing DPAS for smaller locations leading to an easier installation.

 

Frequency: Hourly

 

The DPAS enterprise accounting module produces accounting transactions that currently are not reported from the accounting service and database. The existing Materiel Mgmt. CFO reports are generated from inventory transactions within Materiel Mgmt., and do not provide for start/end dates or other report filters that would be beneficial for accounting users. This SCR moves the CFO Reports that DPAS produces (Summary and Detail) to the Accounting Service. This will enable provide for a single location for producing CFO reports.

 

Generate new CFO Summary and Detail Reports for the Materiel Management module as well as the Property Accountability module when it is transitioned to using the accounting service. Reports will be generated using the new Accounting infrastructure and codes, such as the new CFO Codes, new action codes, and GLACs. Requirements include a set of Reporting DB tables and background processes that utilize the Accounting Transaction table in the Accounting Service,

 

DOD Accounting Policies including DOD FMR 7000.14 and SFFAS-Statement of Federal
Financial Accounting Standards

 

DPAS Accounting users will have meaningful, useful CFO reports generated from the enterprise DPAS accounting module that will support OM&S and Fixed Assets

 

Frequency: Weekly

 

Unit Return and Stock Nbr Inquiry does not have the option to select My Queries under Grid Options

 

Enable a end user to create and share frequently used query.

 

 

 

Eliminate the time consumption spent on selecting and moving columns within Unit Return and Stock Nbr Inquiry.

 

Frequency: Hourly